P1568low severityPowertrain
Speed Control Unable to Hold Speed
on 2012 Ford Focus Electric Motor · FWD
What this code means
The cruise control system cannot maintain the set speed. The PCM detects excessive variation between set speed and actual vehicle speed during cruise control operation.
Symptoms
- Cruise control disengages
- Speed surges while cruise is active
- Check Engine Light
Common causes
- Faulty cruise control servo/actuator
- Vacuum leak to cruise control actuator (older models)
- Throttle cable or linkage issue
- Vehicle speed sensor issue
- ETC system fault (drive-by-wire models)
Diagnostic steps
- Test cruise control actuator operation
- Check vacuum supply to servo (if vacuum operated)
- Verify vehicle speed sensor accuracy
- Check for other DTCs related to throttle or speed
Repair notes
Replace cruise control actuator if faulty. Repair vacuum leaks. Address related DTCs.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0006
Fuel Shutoff Valve A Control Circuit Low
P0007
Fuel Shutoff Valve A Control Circuit High
P0008
Engine Position System Performance - Bank 1
P0009
Engine Position System Performance - Bank 2
P0026
Intake Valve Control Solenoid Circuit Range/Performance Bank 1
P0027
Exhaust Valve Control Solenoid Circuit Range/Performance Bank 1
P0028
Intake Valve Control Solenoid Circuit Range/Performance Bank 2
P0029
Exhaust Valve Control Solenoid Circuit Range/Performance Bank 2
P0033
Turbocharger/Supercharger Bypass Valve Control Circuit