Back to 2013 Ford Focus
Help
2013 FORD FOCUS
2.0L I4 EcoBoost•FWD•DCT•gas•turbo
12 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor500Torque4318Fluid7DTC1137Battery1Maintenance0Recalls12
P1309moderate severityPowertrain

Misfire Detection Monitor Disabled

on 2013 Ford Focus 2.0L I4 EcoBoost · FWD

What this code means

The PCM misfire detection monitor is disabled or not functioning. The camshaft position sensor synchronizer may not be providing the correct signal needed for accurate misfire detection. Common on Ford 3.0L, 3.8L, and 4.2L engines.

Symptoms

  • Check Engine Light
  • Possible rough running
  • Other misfire codes may not set properly
  • Failed emissions test

Common causes

  • Incorrectly installed camshaft position sensor synchronizer
  • Faulty camshaft position sensor
  • Damaged CMP sensor wiring
  • CMP sensor synchronizer gear misaligned

Diagnostic steps

  1. Check camshaft position sensor signal on scan tool
  2. Verify CMP synchronizer is correctly installed and aligned
  3. Test CMP sensor resistance and signal
  4. Inspect CMP wiring and connector

Repair notes

Verify CMP synchronizer alignment. Replace CMP sensor if signal is weak or absent.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITE
Shop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2013 Ford Focus repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ford Focus — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →