P0335high severityPowertrain
Crankshaft Position Sensor A Circuit
on 2021 Ford Mustang Mach-E Standard Range Dual Motor AWD · AWD
What this code means
Malfunction in the crankshaft position (CKP) sensor circuit. The CKP sensor is critical for engine timing and operation.
Symptoms
- Check Engine Light
- No start condition
- Engine stalling
- Intermittent misfire
- Tachometer erratic or dead
Common causes
- Faulty CKP sensor
- Damaged reluctor/tone ring
- Wiring issue
- Sensor gap incorrect
- Oil contamination on sensor
Diagnostic steps
- Test CKP sensor resistance
- Check air gap
- Inspect reluctor ring for damage
- Test wiring continuity
- Scope CKP signal pattern
Repair notes
Replace CKP sensor. Check reluctor ring. CKP variation learn may be needed after replacement.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0070
Ambient Air Temperature Sensor Circuit
P0071
Ambient Air Temperature Sensor Range/Performance
P0072
Ambient Air Temperature Sensor Circuit Low
P0073
Ambient Air Temperature Sensor Circuit High
P0115
Engine Coolant Temperature (ECT) Sensor 1 Circuit
P0116
ECT Sensor 1 Circuit Range/Performance
P0117
ECT Sensor 1 Circuit Low Input
P0118
ECT Sensor 1 Circuit High Input
P0119
ECT Sensor 1 Circuit Intermittent
P0125
Insufficient Coolant Temperature for Closed Loop Fuel Control