P1600low severityPowertrain
Loss of KAM Power — Open Circuit
on 2021 Ford Mustang Mach-E Standard Range Dual Motor AWD · AWD
What this code means
The PCM has detected a loss of Keep Alive Memory (KAM) power. The KAM circuit maintains battery voltage to the PCM to preserve adaptive learning values, fuel trim data, and DTC history when the engine is off.
Symptoms
- Check Engine Light
- Poor idle after battery reconnect
- Transmission shifting harshly initially
- Loss of stored DTCs
- Fuel economy temporarily affected
Common causes
- Battery recently disconnected
- Blown KAM fuse
- Corroded battery cable or terminal
- Wiring issue in KAM circuit
- Faulty PCM power relay
Diagnostic steps
- Check KAM fuse
- Inspect battery terminals for corrosion
- Test battery voltage
- Check wiring from battery to PCM KAM circuit
- Verify PCM power relay operation
Repair notes
Replace blown KAM fuse. Clean battery terminals. Repair wiring. Allow PCM to relearn after fix.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0070
Ambient Air Temperature Sensor Circuit
P0071
Ambient Air Temperature Sensor Range/Performance
P0072
Ambient Air Temperature Sensor Circuit Low
P0073
Ambient Air Temperature Sensor Circuit High
P0115
Engine Coolant Temperature (ECT) Sensor 1 Circuit
P0116
ECT Sensor 1 Circuit Range/Performance
P0117
ECT Sensor 1 Circuit Low Input
P0118
ECT Sensor 1 Circuit High Input
P0119
ECT Sensor 1 Circuit Intermittent
P0125
Insufficient Coolant Temperature for Closed Loop Fuel Control