P3024critical severityPowertrain
CVT Ratio Control System Stuck
on 2021 Ford Mustang Mach-E Standard Range Dual Motor AWD · AWD
What this code means
The CVT ratio control system is unable to change the transmission ratio. The pulleys may be mechanically seized or the stepper motor has failed.
Symptoms
- Check Engine Light
- Engine revs stay constant regardless of speed
- No ratio change during acceleration
- Sudden RPM changes
- Vehicle feels stuck in one gear
- Harsh engagement from stop
Common causes
- Stepper motor failure
- Pulley guide rail damage
- Hydraulic valve body stuck
- Belt/chain jammed
- Foreign object in pulley mechanism
Diagnostic steps
- Monitor CVT ratio PID during driving
- Command ratio change with scan tool
- Check stepper motor operation
- Inspect hydraulic valve body operation
- Check for metallic debris in fluid
Repair notes
CVT likely requires removal and disassembly. Stepper motor or valve body replacement. Severe cases require transmission replacement.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0070
Ambient Air Temperature Sensor Circuit
P0071
Ambient Air Temperature Sensor Range/Performance
P0072
Ambient Air Temperature Sensor Circuit Low
P0073
Ambient Air Temperature Sensor Circuit High
P0115
Engine Coolant Temperature (ECT) Sensor 1 Circuit
P0116
ECT Sensor 1 Circuit Range/Performance
P0117
ECT Sensor 1 Circuit Low Input
P0118
ECT Sensor 1 Circuit High Input
P0119
ECT Sensor 1 Circuit Intermittent
P0125
Insufficient Coolant Temperature for Closed Loop Fuel Control