P0033moderate severityPowertrain
Turbocharger/Supercharger Bypass Valve Control Circuit
on 2022 Ford Mustang Mach-E Extended Range Dual Motor AWD · AWD
What this code means
The computer detected a general fault in the turbo/supercharger bypass valve control circuit. This can affect boost control and engine performance.
Symptoms
- Reduced boost
- Loss of power
- Check engine light on
Common causes
- Faulty bypass valve solenoid
- Wiring or connector fault
- Vacuum line leak
- Failed control module driver
Diagnostic steps
- Scan for boost-related codes
- Inspect bypass valve and wiring
- Test solenoid operation
- Check vacuum lines and control signal
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0006
Fuel Shutoff Valve A Control Circuit Low
P0007
Fuel Shutoff Valve A Control Circuit High
P0008
Engine Position System Performance - Bank 1
P0009
Engine Position System Performance - Bank 2
P0026
Intake Valve Control Solenoid Circuit Range/Performance Bank 1
P0027
Exhaust Valve Control Solenoid Circuit Range/Performance Bank 1
P0028
Intake Valve Control Solenoid Circuit Range/Performance Bank 2
P0029
Exhaust Valve Control Solenoid Circuit Range/Performance Bank 2
P0034
Turbocharger/Supercharger Bypass Valve Control Circuit Low