Free API
P0933high severityPowertrain

Hydraulic Pressure Sensor Range/Performance

on 1997 Ford Probe 2.5L V6 · FWD

What this code means

The transmission hydraulic pressure sensor signal is out of the expected range or responds poorly. Line pressure control may become inaccurate.

Symptoms

  • Slipping or harsh shifts
  • Delayed engagement
  • Transmission warning light

Common causes

  • Faulty hydraulic pressure sensor
  • Actual pressure out of range
  • High resistance in wiring
  • Internal transmission fluid leak

Diagnostic steps

  1. Retrieve codes and monitor sensor data
  2. Perform mechanical line pressure test
  3. Compare measured pressure to sensor value
  4. Replace sensor or repair hydraulic fault as needed

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 1997 Ford Probe repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ford Probe — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →