Free API
P0978moderate severityPowertrain

Shift Solenoid C Control Circuit Range/Performance

on 2004 Ford Taurus 3.0L V6 Vulcan · FWD

What this code means

The PCM detected that the shift solenoid C control circuit is out of range or performing poorly. This can cause shifting issues.

Symptoms

  • Rough or delayed shifts
  • Gear engagement problems
  • Check engine light on

Common causes

  • Faulty shift solenoid C
  • Corroded or damaged wiring
  • Poor electrical connection
  • Failed PCM/TCM driver

Diagnostic steps

  1. Scan and record freeze frame data
  2. Inspect solenoid connector and wiring
  3. Measure solenoid resistance
  4. Test control circuit voltage and ground

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2004 Ford Taurus repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ford Taurus — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →