The 2009 Ford Taurus shares the D3 platform with the Five Hundred/Montego and uses the Duratec 3.5L V6 paired with the 6F50 six-speed automatic. The engine itself is generally robust, but catastrophic internal failures do occur, and transmission cooler issues can destroy the trans if ignored.
Transmission Oil Cooler Failure Leading to Trans Contamination
Common · high severity
Typical onset: 80,000-140,000 mi
Symptoms: Pink milkshake in coolant reservoir (trans fluid mixing with coolant), Transmission slipping, harsh shifts, or delayed engagement, Engine overheating or transmission overheating warnings, Strawberry milkshake appearance in trans fluid on dipstick
Fix: The internal trans cooler in the radiator fails, allowing coolant and ATF to mix. If caught early, flush both systems, replace radiator, and possibly replace transmission fluid and filter (3-4 hours labor). If driven after mixing, transmission internals are toast—requires transmission replacement or rebuild (12-16 hours labor). This is the death sentence for many of these transmissions.
Estimated cost: $800-1,200 if caught early; $3,500-5,500 for transmission replacement
Catastrophic Engine Internal Failure (Water Pump Leak into Cylinders)
Occasional · high severity
Typical onset: 100,000-150,000 mi
Symptoms: White smoke from exhaust on startup, Coolant loss with no visible external leaks, Misfires, rough idle, or sudden loss of power, Hydrolock on startup if coolant pools in cylinders overnight, Milky oil or coolant in oil pan
Fix: The 3.5L Duratec has an internally-mounted water pump. When the seal fails, coolant seeps into the crankcase or directly into cylinders. Light cases may only need water pump replacement and oil/coolant flush (6-8 hours), but most result in scored cylinder walls, spun bearings, or bent rods from hydrolock. Requires short block or complete engine rebuild (18-25 hours labor). This explains why engine rebuild, pistons, rings, crankshaft, and bearings show up frequently.
Estimated cost: $1,200-1,800 for water pump and cleanup if caught immediately; $5,000-8,000 for short block or rebuild
Failed Transmission Mounts
Common · medium severity
Typical onset: 70,000-120,000 mi
Symptoms: Clunking or banging when shifting from Park to Drive or Reverse, Excessive vibration at idle in Drive, Visible engine/trans movement when revving in Park, Harsh engagement into gear
Fix: The hydraulic transmission mount fails, allowing excessive powertrain movement. Replace transmission mount and inspect engine mounts while in there (2-3 hours labor). Common enough that you should budget for it on any high-mileage example.
Estimated cost: $350-600
Head Gasket Failure (Both Banks)
Occasional · high severity
Typical onset: 120,000-180,000 mi
Symptoms: External coolant leaks from cylinder head mating surface, Overheating with no obvious cause, White exhaust smoke, Combustion gases in coolant (bubbling in reservoir)
Fix: Not as common as the water pump issue, but head gaskets do fail on higher-mileage examples, sometimes accelerated by overheating events. Requires removal of both cylinder heads, surface milling if warped, new gaskets, and timing chain/guide inspection while apart (14-18 hours labor). Often coupled with other deferred maintenance.
Estimated cost: $2,800-4,200
Clogged/Corroded Fuel Filter (In-Tank)
Occasional · medium severity
Typical onset: 90,000-150,000 mi
Symptoms: Hard starting or extended cranking, Loss of power under load or uphill, Sputtering or hesitation at highway speeds, Check engine light with fuel trim codes (P0171/P0174)
Fix: The in-tank fuel filter is not a regular service item and clogs over time, especially with poor fuel quality. Requires fuel pump module removal, sometimes destroying the assembly in the process. Replace fuel pump module with new filter sock (2.5-3.5 hours labor).
Estimated cost: $450-750
Power Steering Pump Whine and Failure
Occasional · low severity
Typical onset: 80,000-130,000 mi
Symptoms: Whining or groaning noise when turning, especially when cold, Stiff or heavy steering at low speeds, Power steering fluid leaks from pump or hoses
Fix: The hydraulic power steering pump develops internal wear. Replace pump and flush system, inspect hoses for leaks (2-3 hours labor). Not a breakdown risk but annoying and gets worse.
Estimated cost: $400-650
Owner tips
Inspect coolant reservoir religiously for pink/milky contamination—early detection of trans cooler failure saves $4,000+
Monitor for coolant loss even without visible leaks; internal water pump seepage kills engines
Change transmission fluid every 50,000 mi with Mercon LV spec fluid—this trans does not like abuse
Budget $1,000+ for deferred maintenance on any 100k+ example (mounts, hoses, pump seals)
Pass unless you find a meticulously maintained example under 80k miles with full records—too many expensive catastrophic failure modes lurking at higher mileage.
AI-assisted summary drawn from NHTSA recall data, our labor-times database, and platform knowledge. Not a substitute for a pre-purchase inspection on a specific vehicle.
Fitment notes: Standard flooded battery; battery located in engine compartment
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Every control module on the 2008-2009 Ford Taurus — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Power Steering Control Module (PSCM)2.8 hr R&Rdealer / factory tool +0.6 hr▸ programming details
📍 Integrated with electric power steering column assembly, below instrument panel
🔧 Ford IDS with VCM II
⚠️ Steering angle sensor calibration mandatory after replacement. Module integrated with column; requires column removal.
Body Control Module (BCM)2.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Behind center of instrument panel, above center console, mounted to HVAC plenum
🔧 Ford IDS with VCM II
⚠️ Stores as-built configuration data. Requires complete configuration download and all accessory module relearns.
⚠️ PATS transceiver is separate (ignition lock cylinder); module function integrated in cluster. All keys must be reprogrammed.
Seat Control Module (SCM)0.8 hr R&Rrelearn only +0.2 hrwith power driver seat▸ programming details
📍 Under driver seat, mounted to seat frame
🔧 Self-calibrate
⚠️ Memory seat positions lost on replacement. No programming required.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
Size-standard part numbers — verify your connector type before buying. Rear blades are model-specific; check the package's vehicle list.
Fuel economy figures are EPA data via fueleconomy.gov (median across matching trims). Performance figures are compiled estimates for the 2009 Ford Taurus 3.5L V6 and can vary by trim.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years.