B10DCcritical severityBody
Restraints Control Module Internal Fault
on 2014 Ford Taurus 2.0L I4 EcoBoost · FWD
What this code means
The airbag control module has detected an internal failure and can no longer operate reliably. This may prevent airbags from deploying in a crash.
Symptoms
- Airbag warning light on
- SRS system disabled
- Fault stored in RCM
Common causes
- Faulty restraints control module
- Internal circuit failure
- Water damage to module
- Corroded module connectors
Diagnostic steps
- Scan RCM for fault codes
- Check module power and ground
- Inspect for water or corrosion damage
- Replace restraints control module if internal fault confirmed
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open