Free API
P0227high severityPowertrain

Throttle/Pedal Position Sensor/Switch C Circuit Low

on 2014 Ford Transit Connect 2.5L I4 · FWD

What this code means

The C throttle or pedal position sensor is reporting an abnormally low voltage. This usually points to a short to ground or a failed sensor.

Symptoms

  • Check engine light on
  • Reduced power mode
  • Poor throttle response

Common causes

  • Short to ground in wiring
  • Failed sensor C
  • Corroded connector
  • Faulty PCM

Diagnostic steps

  1. Read trouble codes
  2. Check signal voltage at sensor
  3. Inspect wiring for short to ground
  4. Replace sensor if faulty

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2014 Ford Transit Connect repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ford Transit Connect — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →