transmission
Transmission Control Module
for 2021 Ford Transit Connect 2.0L Duratec GDI I4 (gas, 8-speed automatic) · FWD
🔧Does this apply to your car? Most transmission control modules must be programmed and have adaptations relearned after replacement — and on some vehicles (many Mercedes 722.9, ZF mechatronic units) the TCM lives INSIDE the transmission, which changes this from a 1-hour job to a 4-8 hour job. Verify your TCM location before quoting.
🔓 Step-by-step procedure: not written yet
For $3, we'll write the full Transmission Control Module procedure for the 2021 Ford Transit Connect — steps, torque values, tips — and it becomes free for every owner on earth, forever, with your name on it. Usually live within the hour.
Original documentation, honestly labeled — and pages keep improving after you buy, as corrections and factory references land. How our data is made →
Labor Hours
1.5hr
Range: 1.2–1.8 hr
Data quality
✓ Verified
Cross-checked against OEM or multiple independent sources.
At (your shop rate)
$225
Estimated labor cost. Parts not included. Rate saves to this browser and the quote builder.
Other labor times on this vehicle
Transmission Control Module on similar vehicles
2022 Ford Transit Connect 2.0L Duratec GDI I4 (gas, 8-speed automatic)
1.5 hr
2020 Ford Transit Connect 2.0L Duratec GDI I4 (gas, 8-speed automatic)
1.5 hr
2023 Ford Transit Connect 2.0L Duratec GDI I4 (gas, 8-speed automatic)
1.5 hr
2019 Ford Transit Connect 2.0L I4
1.5 hr
2019 Ford Transit Connect 2.5L I4
1.5 hr
2018 Ford Transit Connect 2.5L Duratec I4 (gas, 6-speed automatic)
1.5 hr