🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2024 FORD TRANSIT CONNECT

2.5L I4RWDAUTOMATICgas
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this Transit Connect
Every control module on the 2024-2026 Ford Transit Connect — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Module (TCM)4.8 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Integrated with valve body inside automatic transmission (8F35)
🔧 Ford FDRS with J2534 device
⚠️ Transmission drop required. Security gateway authentication and adaptive learning drive cycle required.
Power Steering Control Module (PSCM)2.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Integrated with electric power steering column assembly
🔧 Ford FDRS with J2534 device
⚠️ Steering column removal required. Module configuration and steering angle sensor calibration required.
Anti-Lock Brake System Module (ABS)1.8 hr R&Rdealer / factory tool +0.6 hr▸ programming details
📍 Engine compartment, driver side inner fender near strut tower
🔧 Ford FDRS with J2534 device
⚠️ Includes hydraulic control unit. Brake bleeding and module configuration required after replacement.
Body Control Module (BCM)1.5 hr R&Rsecurity gateway +1.2 hr▸ programming details
📍 Behind driver side lower dash panel, above fuse box
🔧 Ford FDRS with J2534 device
⚠️ Stores as-built data for all body options. Critical to transfer configuration from old module or retrieve from Ford database.
Telematics Control Unit (TCU)1.5 hr R&Rdealer / factory tool +0.6 hrwith FordPass Connect▸ programming details
📍 Behind headliner, center roof area near rearview mirror
🔧 Ford FDRS with J2534 device
⚠️ Requires module configuration, cellular activation, and Ford account re-linking after replacement.
Door Zone Module (DZM)1.2 hr R&Rdealer / factory tool +0.3 hrwith power sliding doors▸ programming details
📍 Inside driver door, behind door panel
🔧 Ford FDRS with J2534 device
⚠️ Controls power sliding door operation. Configuration required after replacement.
Powertrain Control Module (PCM)1.2 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Engine compartment, driver side firewall, mounted to bulkhead
🔧 Ford FDRS with J2534 device
⚠️ Security gateway authentication required. VIN-specific calibration and PMI procedure mandatory.
Heating Ventilation Air Conditioning Module (HVAC)1.2 hr R&Rdealer / factory tool +0.4 hrwith automatic climate control▸ programming details
📍 Behind center stack HVAC control panel
🔧 Ford FDRS with J2534 device
⚠️ Manual HVAC uses non-programmable control head. Auto climate requires PMI procedure.
Image Processing Module (IPMB)1.0 hr R&Rdealer / factory tool +0.5 hrwith lane keeping/traffic sign recognition▸ programming details
📍 Behind rearview mirror, integrated with camera housing
🔧 Ford FDRS with J2534 device
⚠️ Forward-facing camera system. Windshield calibration required after replacement.
Gateway Module (GWM)1.0 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Behind driver side lower dash panel, near BCM
🔧 Ford FDRS with J2534 device
⚠️ Security gateway resides here. Replacement requires Ford authentication and network configuration.
Blind Spot Information System Module (BLIS)1.0 hr R&Raftermarket tool +0.3 hrwith blind spot monitoring▸ programming details
📍 Behind rear bumper, driver side near tail lamp assembly
🔧 Autel/Launch or FDRS
⚠️ Radar sensor calibration recommended after replacement
Parking Aid Module (PAM)1.0 hr R&Rdealer / factory tool +0.4 hrwith rear parking sensors▸ programming details
📍 Behind rear interior trim panel, driver side cargo area
🔧 Ford FDRS with J2534 device
⚠️ Sensor calibration procedure required after module replacement.
Restraints Control Module (RCM)1.0 hr R&Rsecurity gateway +0.6 hr▸ programming details
📍 Center console area, below center stack behind trim panel
🔧 Ford FDRS with J2534 device
⚠️ Battery disconnect 2+ minutes required. Crash data clearing and configuration through security gateway.
Audio Control Module / Accessory Protocol Interface Module (APIM)1.0 hr R&Rdealer / factory tool +0.8 hrwith SYNC 4▸ programming details
📍 Center stack, behind touchscreen display
🔧 Ford FDRS with J2534 device
⚠️ SYNC 4 system. Requires as-built configuration, software installation, and Ford account re-pairing.
Liftgate Module (LGM)1.0 hr R&Rdealer / factory tool +0.3 hrwith power liftgate▸ programming details
📍 Inside liftgate, behind interior trim panel
🔧 Ford FDRS with J2534 device
⚠️ Controls power liftgate operation. Module configuration and limit learning required.
Front Lighting Control Module (FLCM)0.8 hr R&Raftermarket tool +0.2 hrwith automatic headlamps▸ programming details
📍 Engine compartment, behind front bumper near driver side headlamp
🔧 Autel/Launch or FDRS
Instrument Panel Cluster (IPC)0.8 hr R&Rsecurity gateway +0.6 hr▸ programming details
📍 Instrument panel, behind gauge cluster face
🔧 Ford FDRS with J2534 device
⚠️ Mileage programming through security gateway required. Must match VIN and odometer reading.
Fuel Pump Control Module (FPCM)0.8 hr R&Rno coding
📍 Rear frame rail, driver side near fuel tank
⚠️ Controls fuel pump speed. No programming required after replacement.
Passive Anti-Theft System Module (PATS)security gateway +0.5 hr▸ programming details
📍 Integrated within PCM
🔧 Ford FDRS with J2534 device
⚠️ PATS integrated in PCM. Key programming through security gateway required after PCM replacement.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →