Free API
P0599moderate severityPowertrain

Thermostat Heater Control Circuit High

on 1998 Ford Windstar 3.8L V6 · FWD

What this code means

The thermostat heater control circuit voltage is too high. This usually indicates an open circuit or short to voltage in the heater control line.

Symptoms

  • Check engine light on
  • Engine warms up slowly
  • Temperature gauge unstable

Common causes

  • Short to voltage in heater circuit
  • Open in heater control wiring
  • Faulty heated thermostat
  • PCM driver failure

Diagnostic steps

  1. Retrieve stored codes
  2. Check heater circuit for short to power
  3. Verify continuity to PCM
  4. Test thermostat heater command with scanner

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 1998 Ford Windstar repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ford Windstar — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →