U0195high severityNetwork
Lost Communication with 4WD Control Module
on 2002 Ford Windstar 3.0L V6 · FWD
What this code means
Cannot communicate with the four-wheel drive engagement control module.
Symptoms
- 4WD indicator flashing
- Cannot engage or disengage 4WD
- Service 4WD light
- Drivetrain warning message
Common causes
- 4WD module failure
- CAN bus wiring
- Module power loss
- Fuse blown
- Transfer case actuator issue
Diagnostic steps
- Check 4WD module fuse
- Test power and ground
- Check CAN wiring
- Test transfer case actuator motor
- Inspect 4WD switch
Repair notes
Check fuses and transfer case actuator. Module may need reprogramming after replacement.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus