P1700high severityPowertrain
Transmission Indeterminate Failure
on 2003 Ford Windstar 3.8L OHV V6 ยท FWD
What this code means
The PCM/TCM has detected an indeterminate transmission failure. The transmission has failed to a neutral state. This is a general transmission failure code that may accompany more specific codes.
Symptoms
- Check Engine Light
- Transmission slipping
- Harsh shifts
- Vehicle in limp mode
- Transmission may default to one gear
Common causes
- Internal transmission failure
- Solenoid pack failure
- Valve body issue
- Low transmission fluid
- Transmission control module failure
Diagnostic steps
- Check for additional transmission DTCs for more specific diagnosis
- Check transmission fluid level and condition
- Inspect transmission wiring connector
- Monitor transmission pressures with scan tool
Repair notes
Check for companion DTCs. Check fluid level first. May require transmission disassembly for internal failure.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1