P1509moderate severityPowertrain
Idle Air Control System RPM Too High
on 2017 GMC Acadia 2.5L I4 · AWD
What this code means
The PCM detected that the engine idle speed is higher than the specified maximum range and the IAC system is not responding to correct it.
Symptoms
- High idle speed
- Engine revving at idle
- Difficulty slowing engine
- Revving when coming to a stop
- Erratic idle speed
Common causes
- Faulty IAC valve stuck open
- Vacuum leak
- Dirty throttle body with air bypass
- Faulty IAC valve wiring
- PCM failure (rare)
- Intake manifold gasket leak
Diagnostic steps
- Unplug IAC connector and check if idle normalizes
- Check for vacuum leaks
- Inspect throttle body for air bypass around blade
- Test IAC valve operation with scan tool
- Check intake manifold gaskets
Repair notes
Check for vacuum leaks first. Clean throttle body. Replace IAC valve if stuck open.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1