P3655high severityPowertrain
GDI Fuel Metering Unit Control Stuck
on 2017 GMC Acadia 2.5L I4 · AWD
What this code means
The high-pressure fuel pump metering unit that controls fuel volume entering the pump is stuck, causing incorrect fuel rail pressure.
Symptoms
- Check Engine Light
- Fuel pressure too high or too low
- Engine stalling
- Hard starting
- Rough running
- Fuel smell from engine
Common causes
- Metering unit solenoid failure
- Contaminated fuel blocking metering valve
- Metering unit wiring short
- Mechanical debris in metering valve
- PCM driver circuit failure
Diagnostic steps
- Monitor fuel metering command vs actual rail pressure
- Test metering unit solenoid resistance
- Inspect fuel quality
- Command metering unit through range with scan tool
- Check PCM driver output
Repair notes
Replace high-pressure fuel pump metering unit. May require full pump replacement depending on design. Check fuel quality.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1