body
Bumper Cover - Front
for 2019 GMC Acadia 3.6L V6 · FWD
🎨What's included: replacement labor only — panel R&R plus the interior/exterior strip and refit it takes to get there. Refinish work (prime, paint, blend) is billed as a separate operation, per standard body labor guide practice.
🖌️Refinish for this panel: ~3 hr base/clear — billed as a separate operation from the replacement time above, per standard body-guide practice.
📡ADAS calibration required after this repair. This vehicle carries: front radar (if equipped) — dynamic calibration (Scan tool drive cycle 25-45 mph straight road) · parking sonar (if equipped) — self calibration (Scan tool to verify operation). Budget it in the estimate — skipping calibration leaves safety systems un-aimed and the liability on the shop.
🔓 Step-by-step procedure: not written yet
For $3, we'll write the full Bumper Cover - Front procedure for the 2019 GMC Acadia — steps, torque values, tips — and it becomes free for every owner on earth, forever, with your name on it. Usually live within the hour.
Labor Hours
1.5hr
Range: 1.2–1.8 hr
Data quality
Book-style estimate
Not yet expert-verified. Have the book time? Correct it below — takes 30 seconds.
At $110/hr (independent shop)
$165
Estimated labor cost. Parts not included.