Free API
P1639high severityPowertrain

5 Volt Reference 2 Circuit

on 2025 GMC Canyon AT4X 2.7L I4 Turbo · 4WD

What this code means

The PCM detected that the 5-volt reference B circuit voltage is out of tolerance. This is a separate 5V reference circuit from P1635 and feeds a different set of sensors.

Symptoms

  • Check Engine Light
  • Engine stalling
  • Multiple sensor DTCs
  • Poor drivability
  • Loss of power

Common causes

  • Short to ground in a connected sensor circuit
  • Damaged sensor wiring
  • Faulty sensor on this reference
  • PCM 5V reference driver failure

Diagnostic steps

  1. Measure 5V reference 2 voltage
  2. Disconnect sensors one at a time on this circuit
  3. Inspect wiring for shorts
  4. Test PCM output

Repair notes

Same diagnostic approach as P1635. Disconnect sensors one at a time to isolate the shorted circuit.

Other Powertrain codes on this vehicle

For shop owners
Diagnosing for customers?
Text them the estimate with photos and get approval in minutes with Auto Shop Base.
Talk to the ownerSee what's included
Built by a shop owner. Talk to Chris, not a sales rep.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2025 GMC Canyon AT4X repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the GMC Canyon AT4X — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
A free website, SEO and Google reviews with your shop software. Auto Shop Base Professional, $250/mo, with our labor times on every estimate.
See what's included →