P1250low severityPowertrain
Early Fuel Evaporation Heater Circuit
on 2005 GMC Canyon 2.8L I4 · RWD
What this code means
The PCM detected a malfunction in the Early Fuel Evaporation (EFE) heater circuit. The EFE system heats the intake to aid fuel vaporization during cold starts. The PCM checks EFE heater resistance with the heater off (should be above 2.5V) and on (should be below 0.3V).
Symptoms
- Check Engine Light
- Rough idle when cold
- Poor cold-start performance
- Increased cold-start emissions
- Poor fuel economy in cold weather
Common causes
- Failed EFE heater element
- EFE heater control circuit open
- EFE heater ignition power circuit open
- Corroded EFE heater connections
- PCM failure (rare)
Diagnostic steps
- Test EFE heater element for continuity
- Check control circuit voltage
- Test ignition power supply to heater
- Inspect wiring and connectors for corrosion
- Monitor EFE circuit with scan tool
Repair notes
Test EFE heater element resistance. Replace heater if open. Check power supply and control circuit wiring.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1