Free API
P0396moderate severityPowertrain

Camshaft Position Sensor B Circuit High (Bank 2)

on 2005 GMC Canyon 3.5L I5 · 4WD

What this code means

The PCM sees an abnormally high signal from the camshaft position sensor on bank 2, sensor B. This can throw off valve timing readings and affect fuel and spark control.

Symptoms

  • Check engine light on
  • Rough or stalling engine
  • Reduced power

Common causes

  • Faulty camshaft position sensor
  • Damaged wiring or connector
  • Reluctor/tone ring damage
  • Bad PCM

Diagnostic steps

  1. Scan and confirm code with freeze frame
  2. Inspect sensor wiring and connectors
  3. Check sensor signal with scope or meter
  4. Replace sensor and retest

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2005 GMC Canyon repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the GMC Canyon — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →