Control Module Throttle Actuator Position Performance

What this code means

The PCM detected a discrepancy between the commanded throttle actuator position and the actual position. The electronic throttle control system is not achieving the position requested by the PCM.

Symptoms

• Reduced Engine Power message
• Check Engine Light
• Limited acceleration
• Engine may idle only
• Limp mode

Common causes

• Carbon buildup in throttle body
• Faulty throttle body actuator motor
• Worn or damaged TPS
• Wiring issue to throttle body
• PCM calibration issue

Diagnostic steps

1. Clean throttle body
2. Test throttle body motor
3. Check TPS sensor readings
4. Inspect all throttle body connectors
5. Check for PCM software update

Repair notes

Clean throttle body. If condition persists, replace throttle body assembly. Check for PCM reprogramming TSBs.

Other Powertrain codes on this vehicle