B1063critical severityBody
Front Passenger Airbag (Inflator) System Malfunction
on 2018 Honda Accord 1.5L I4 Turbo · FWD
What this code means
The SRS module detects an open or high resistance in the front passenger airbag inflator circuit. No direct OBD P-code equivalent exists for this manufacturer-specific SRS code.
Symptoms
- SRS warning light on
- Passenger airbag may not deploy
- Fault stored in SRS module
Common causes
- Faulty passenger airbag inflator
- Open in airbag circuit wiring
- Loose or corroded connector
- Damaged wiring harness
Diagnostic steps
- Scan SRS module for codes
- Inspect passenger airbag connectors
- Measure inflator circuit resistance
- Replace faulty component
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0009
Rear Center Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment