Free API
1.5L I4 TurboFWDCVTgasturbo
5 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0386moderate severityPowertrain

Crankshaft Position Sensor B Circuit Range/Performance

on 2020 Honda Accord 1.5L I4 Turbo · FWD

What this code means

The PCM detected the crankshaft position sensor B signal is out of expected range or performance. This can cause timing errors and drivability issues.

Symptoms

  • Check engine light on
  • Rough idle or misfire
  • Hesitation or stalling

Common causes

  • Faulty crankshaft position sensor
  • Damaged reluctor ring
  • Excessive air gap
  • Wiring fault

Diagnostic steps

  1. Scan for codes and freeze frame
  2. Inspect reluctor ring for damage
  3. Measure sensor air gap
  4. Replace sensor if out of spec

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2020 Honda Accord repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Honda Accord — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →