Free API
2.0L I4 Hybrid•AWD•CVT•hybrid•turbo
3 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0280moderate severityPowertrain

Cylinder 6 Injector Circuit Low

on 2023 Honda CR-V 2.0L I4 Hybrid · AWD

What this code means

The PCM detected a low voltage or open condition in the fuel injector control circuit for cylinder 6. This usually means the injector is not being driven properly.

Symptoms

  • Engine misfire
  • Rough idle
  • Reduced power

Common causes

  • Faulty fuel injector
  • Open or shorted injector wiring
  • Poor connector contact
  • Failed injector driver in PCM

Diagnostic steps

  1. Scan for related injector codes
  2. Check injector connector and wiring
  3. Measure injector coil resistance
  4. Test injector driver signal at PCM

Other Powertrain codes on this vehicle

For shop owners
Diagnosing for customers?
Text them the estimate with photos and get approval in minutes with Auto Shop Base.
Talk to the ownerSee what's included
Built by a shop owner. Talk to Chris, not a sales rep.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2023 Honda CR-V repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Honda CR-V — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
A free website, SEO and Google reviews with your shop software. Auto Shop Base Professional, $250/mo, with our labor times on every estimate.
See what's included →