Free API
P0682low severityPowertrain

Cylinder 12 Glow Plug Circuit

on 2011 Hyundai Tucson 2.4L I4 · AWD

What this code means

The PCM detected a fault in the glow plug control circuit for cylinder 12. Failed glow plugs cause hard starting and rough running in cold conditions.

Symptoms

  • Hard cold starting
  • Rough running when cold
  • Warning lamp illuminated

Common causes

  • Faulty glow plug cylinder 12
  • Corroded or broken wiring
  • Bad glow plug control module
  • Blown fuse

Diagnostic steps

  1. Scan for diagnostic codes
  2. Measure cylinder 12 glow plug resistance
  3. Check harness and connectors
  4. Test control module output

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2011 Hyundai Tucson repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Hyundai Tucson — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →