maintenance

Power Steering Service

for 2023 Hyundai Tucson 2.5L I4 Smartstream · FWD

Difficulty

Easy

Time

30 min

Tools

Steps

✓Fact-checked. Built from OLP's spec database, then independently fact-checked line by line with every correction applied. Master-tech sign-off by Chris Hackleman is queued. Cross-check torque values against the factory manual, and stop if anything looks unsafe. How our data is made.

This procedure addresses service for the 2016-2024 Hyundai Tucson 2.5L I4 AWD, which uses an Electric Power Steering (EPS) system that requires no fluid service or maintenance.

Warnings

ℹ️The 2016-2024 Hyundai Tucson 2.5L I4 is equipped with Electric Power Steering (EPS) which has no hydraulic fluid to service. Traditional power steering fluid service does not apply to this vehicle.

⚠If experiencing steering issues, diagnose the EPS system using proper scan tools. Do not attempt to add fluid as there is no reservoir.

Tools required

Hyundai GDS diagnostic scanner or equivalentEssential

Digital multimeter

As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Preparation

Verify vehicle is equipped with Electric Power Steering by confirming absence of power steering fluid reservoir in engine bay
Park vehicle on level ground and engage parking brake
Turn ignition to OFF position

Procedure

1
Confirm Electric Power Steering System
Open hood and visually inspect the engine bay. Confirm there is no power steering fluid reservoir, no hydraulic pump driven by serpentine belt, and no high-pressure hydraulic lines running to the steering rack. The EPS motor is integrated into the steering column or rack assembly and is entirely electric.
2
Inspect EPS System Components
Check the condition of the EPS wiring harness for damage, chafing, or corrosion at connectors. Inspect the steering column area for proper mounting and absence of unusual noise or binding when turning the steering wheel lock to lock with vehicle stationary and engine running.
3
Check for Diagnostic Trouble Codes
Connect Hyundai GDS diagnostic scanner or equivalent OBD-II scan tool. Check for any stored or pending EPS-related fault codes in the MDPS (Motor Driven Power Steering) module. Record any codes found for further diagnosis if steering complaints exist.
4
Verify EPS Warning Lamp Operation
Turn ignition to ON position without starting engine. Verify the EPS warning lamp (steering wheel icon) illuminates briefly during bulb check and then extinguishes. If lamp remains illuminated, diagnose using factory procedures as this indicates an EPS system fault.
5
Test EPS Assist Function
Start the engine and allow it to idle. Turn the steering wheel slowly from lock to lock while stationary. EPS assist should provide smooth, consistent power assistance without jerking, hesitation, or unusual noises. Note any abnormalities for further diagnosis.

Reassembly

No disassembly required for this verification procedure

Verification

Confirm no EPS warning lamp is illuminated on instrument cluster
Verify smooth and consistent power steering assist during test drive with various steering inputs
Ensure no diagnostic trouble codes are present in MDPS module
Educate vehicle owner that no periodic fluid service is required for the electric power steering system