C0501moderate severityChassis

Transfer Case Control Module Communication

on 2023 Hyundai Tucson 2.5L I4 ยท AWD

What this code means

Loss of communication between the transfer case module and other vehicle systems.

Symptoms

  • 4WD light flashing
  • Service 4WD warning
  • Cannot select drive modes
  • Transmission may default to limp mode

Common causes

  • CAN bus wiring fault to module
  • Module connector disconnected
  • Module power loss
  • CAN bus termination issue

Diagnostic steps

  1. Check CAN wiring to transfer case module
  2. Inspect module connector
  3. Verify power and ground at module
  4. Look for U-codes related to transfer case
  5. Check CAN bus resistance

Repair notes

Repair CAN wiring or connector. Replace module if communication chip failed.

Other Chassis codes on this vehicle

๐Ÿ”ง Database maintained under the daily editorial review of Chris Hackleman ยท Master Technician ยท 20+ years and Jeff Moore ยท Master Mechanic ยท 20+ years. Spot an error? Use the Help link above โ€” a human reads every report.
Stuck on this repair? Take it to The Diag Desk โ€” ask a master tech about this exact car โ†’ real human answer within 24h, never AI
โš  STILL BEHIND THE PAYWALL
The 2023 Hyundai Tucson repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy โ€” and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Hyundai Tucson โ€” $99 โ†’
Building an app?
Free API access to all this data โ€” 10 requests/day, no card required.
Get an API key โ†’
Run a shop?
Manage repairs, estimates, and customers with ShopBase โ€” $249/mo, all features included.
Try ShopBase โ†’