🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2022 HYUNDAI VELOSTER TURBO

1.6L Turbo I4FWDDCTgasturbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this Veloster Turbo
Every control module on the 2018-2022 Hyundai Veloster Turbo — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Unit (TCU)2.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Engine bay, driver side near battery, integrated into transmission valve body (DCT models) or mounted separately (6AT models)
🔧 Hyundai GDS with online authentication
⚠️ DCT models require transmission removal for internal TCU; adaptive learning reset required; online authentication mandatory
Motor Driven Power Steering Control Module (MDPS)2.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Steering column, integrated with electric assist motor at base of column
🔧 Hyundai GDS or Autel MaxiSys
⚠️ Steering angle sensor calibration required; torque sensor zero-point learning mandatory; improved diagnostics vs 2013-2017
Electronic Stability Control Module (ESC)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, driver side near master cylinder, integrated with hydraulic unit
🔧 Hyundai GDS or Autel MaxiSys Elite
⚠️ Brake bleeding required; steering angle sensor calibration mandatory; 2019+ may require security gateway PIN
Central Gateway Module (CGW)1.5 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Driver side lower dash, integrated with main fuse box
🔧 Hyundai GDS with online authentication
⚠️ VIN writing required; security gateway implemented 2019+; requires PIN from Hyundai server for programming; CAN-FD support on 2019+ models
Heating Ventilation Air Conditioning Control Module (HVAC)1.5 hr R&Rrelearn only +0.3 hr▸ programming details
📍 Behind center dash, integrated with climate control head unit
🔧 Hyundai GDS or Autel MaxiSys
⚠️ Actuator calibration required after replacement; refrigerant recovery needed for full dash removal
Forward Radar Module (FRM)1.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Front bumper, center behind lower grille (if equipped with SmartSense)
🔧 Hyundai GDS with online authentication
⚠️ Only on 2019+ models with SmartSense safety package; radar aiming calibration required after replacement; requires alignment tool
Driver Door Module (DDM)1.2 hr R&Rrelearn only +0.3 hr▸ programming details
📍 Driver door, inside door panel near latch mechanism
🔧 Hyundai GDS or Autel MaxiSys
⚠️ Window auto-up/down relearn required; standard on models with power windows and smart key
Engine Control Unit (ECU)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Engine bay, driver side firewall, mounted on bracket near brake booster
🔧 Hyundai GDS with online authentication
⚠️ VIN writing and immobilizer synchronization required; online server authentication needed for programming; 2019+ may require security PIN
Body Control Module (BCM)1.0 hr R&Rdealer / factory tool +1.2 hr▸ programming details
📍 Driver side lower dash, behind kick panel above fuse box
🔧 Hyundai GDS with online authentication
⚠️ VIN writing required; all options must be configured; smart key relearn necessary; 2019+ requires security PIN from Hyundai server
Audio Video Navigation Head Unit (AVN)1.0 hr R&Rrelearn only +0.3 hr▸ programming details
📍 Center dash, 7-inch or 8-inch touchscreen depending on trim
🔧 Hyundai GDS or self-learning
⚠️ Radio code may be required; Bluetooth pairing reset needed; Apple CarPlay/Android Auto standard 2019+
Telematics Control Unit (TCU)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center dash or under passenger seat
🔧 Hyundai GDS with online authentication
⚠️ Blue Link subscription activation required; 4G LTE on 2019+ models; 3G models obsolete after 2022 network shutdown
Parking Assist System Module (PAS)0.8 hr R&Rrelearn only +0.3 hr▸ programming details
📍 Rear cargo area, driver side trim panel (if equipped)
🔧 Hyundai GDS or Autel MaxiSys
⚠️ Sensor calibration required; available on higher trims with parking sensors
Supplemental Restraint System Control Module (SRS)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console, under center stack trim, mounted to transmission tunnel
🔧 Hyundai GDS or Autel MaxiSys Elite
⚠️ Battery disconnect required; wait 3 minutes before removal; crash data clearing required; VIN sync needed
Forward Camera Module (FCM)0.8 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Windshield, center top behind rearview mirror (if equipped with SmartSense)
🔧 Hyundai GDS with online authentication
⚠️ Only on 2019+ models with SmartSense; windshield calibration required after replacement or windshield change; static calibration procedure
Instrument Cluster (IPC)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Instrument panel, behind steering wheel, full digital display on higher trims
🔧 Hyundai GDS with online authentication
⚠️ Mileage programming requires dealer authentication; VIN synchronization mandatory; odometer fraud prevention; digital cluster on 2019+ Turbo Ultimate
Fuel Pump Control Module (FPCM)0.6 hr R&Rno coding
📍 Under rear seat or in trunk area, near fuel tank
⚠️ Controls fuel pump relay and pressure; plug-and-play replacement
Smart Key Control Module (SKCM)0.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Center console area, integrated with BCM or separate module near ignition
🔧 Hyundai GDS with online authentication
⚠️ All keys must be reprogrammed; ECU immobilizer sync required; 2019+ requires online authentication and security PIN
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →