C0095moderate severityChassis
Brake Lamp Switch Circuit
on 1996 Jeep Cherokee 4.0L I6 · AWD
What this code means
Malfunction in the brake lamp switch circuit detected by the ABS or stability control module.
Symptoms
- ABS light on
- Cruise control inoperative
- Brake lights stuck on or not illuminating
- Shift interlock may not release
Common causes
- Brake light switch out of adjustment
- Faulty brake light switch
- Wiring damage
- Blown brake light fuse
Diagnostic steps
- Test brake light switch operation
- Check brake light fuse
- Inspect brake light switch adjustment at pedal
- Test circuit continuity
- Check for power and ground at switch
Repair notes
Adjust or replace brake light switch. This switch serves multiple systems.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic