P1296moderate severityPowertrain
MAP Sensor Reading Exceeds Barometric Pressure
on 1998 Jeep Cherokee 2.5L I4 ยท AWD
What this code means
The PCM has detected that the MAP sensor reading exceeds the barometric pressure reading, which is physically impossible under normal conditions. This indicates a sensor fault or a significant pressure anomaly in the intake manifold.
Symptoms
- Check Engine Light
- Poor engine performance
- Rough idle
- Black smoke from exhaust
- Poor fuel economy
Common causes
- Faulty MAP sensor
- MAP sensor vacuum hose disconnected or leaking
- Short circuit in MAP sensor wiring
- PCM reference voltage issue
- Intake manifold pressure anomaly
Diagnostic steps
- Compare MAP sensor reading at key-on engine-off to barometric pressure
- Inspect MAP sensor vacuum hose for leaks or disconnection
- Test MAP sensor output voltage range
- Check 5V reference circuit
- Verify MAP sensor wiring for shorts
Repair notes
Replace the MAP sensor if its reading exceeds barometric pressure with the engine off.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1