B0086high severityBody
SRS Warning Lamp Circuit Malfunction
on 2014 Jeep Cherokee 2.4L I4 · 4WD
What this code means
The SRS airbag warning lamp circuit is malfunctioning. The lamp may be always on, always off, or not performing the bulb check properly.
Symptoms
- Airbag warning light stuck on
- Airbag light not illuminating during bulb check
- SRS fault stored
- Cannot determine if SRS system has other faults
Common causes
- Burnt out airbag warning lamp bulb
- Wiring issue to instrument cluster
- Instrument cluster fault
- ACM lamp driver failure
Diagnostic steps
- Check airbag warning lamp bulb
- Test lamp circuit voltage from ACM
- Inspect wiring to cluster
- Test cluster lamp driver
- Scan for additional SRS codes
Repair notes
Replace warning lamp bulb or repair wiring. If ACM lamp driver is faulty, replace ACM.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit