B1011low severityBody
TPMS Receiver Antenna Circuit
on 2014 Jeep Cherokee 2.4L I4 · 4WD
What this code means
Malfunction in the TPMS receiver antenna circuit. The antenna receives low-power RF signals from wheel-mounted sensors.
Symptoms
- All TPMS sensors not reading
- TPMS system fault
- Receiver module reports no sensor signals
Common causes
- Damaged TPMS antenna
- Antenna cable disconnected
- Antenna corroded
- Aftermarket modification covering antenna
Diagnostic steps
- Inspect antenna location and condition
- Check antenna cable connection
- Test antenna circuit
- Look for aftermarket modifications near antenna
Repair notes
Replace TPMS antenna or reconnect cable.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit