B2100low severityBody
Automatic Headlight Sensor Circuit
on 2014 Jeep Cherokee 2.4L I4 · 4WD
What this code means
Malfunction in the automatic headlight ambient light sensor circuit.
Symptoms
- Auto headlights not turning on in tunnels/darkness
- Headlights on in bright daylight
- Auto headlight feature disabled
- Dash light sensor not adjusting brightness
Common causes
- Faulty ambient light sensor
- Sensor covered by dashboard object
- Wiring damage
- BCM auto-light module fault
- Sensor window dirty
Diagnostic steps
- Check light sensor reading with scan tool
- Clean sensor lens on dashboard
- Inspect sensor wiring
- Test BCM auto headlight output
- Verify feature is enabled in settings
Repair notes
Replace ambient light sensor or clean sensor window. Check that nothing is covering the sensor on the dash top.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit