C0059high severityChassis
ABS Isolation Valve Solenoid Circuit
on 2014 Jeep Cherokee 2.4L I4 · 4WD
What this code means
Malfunction in the ABS isolation valve solenoid, used to isolate the master cylinder from the ABS modulator.
Symptoms
- ABS light on
- Brake pedal feels unusual
- ABS not functioning
- Pedal sinks during ABS activation
Common causes
- Isolation valve solenoid failure
- ABS module internal fault
- Wiring open or short
- Contaminated brake fluid
Diagnostic steps
- Test solenoid resistance through connector
- Command isolation valve with scan tool
- Check brake fluid condition
- Inspect module connector pins
Repair notes
Replace ABS modulator assembly. Bleed brake system thoroughly.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent