C0141high severityChassis
EBD Brake Pressure Sensor Correlation
on 2014 Jeep Cherokee 2.4L I4 · 4WD
What this code means
The brake pressure sensors used for electronic brake force distribution are not correlating properly.
Symptoms
- ABS light on
- EBD warning
- Braking feel inconsistent
Common causes
- Pressure sensor drift
- Air in brake hydraulic system
- Master cylinder internal bypass
- Sensor wiring fault
Diagnostic steps
- Compare front and rear pressure sensor readings
- Bleed brake system
- Test individual pressure sensors
- Check for master cylinder leaks
- Inspect sensor wiring
Repair notes
Bleed brake system. Replace faulty pressure sensor or master cylinder.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent