C0245moderate severityChassis
Active Steering Position Sensor Circuit
on 2014 Jeep Cherokee 2.4L I4 · 4WD
What this code means
The position feedback sensor for the active steering superposition motor has malfunctioned.
Symptoms
- Active steering warning
- System defaults to center position
- Steering ratio locked
- May affect park assist
Common causes
- Position sensor failure
- Sensor wiring damage
- Sensor contamination
- Motor assembly mechanical failure
Diagnostic steps
- Read position sensor data with scan tool
- Command small motor movements and check sensor response
- Inspect sensor wiring
- Check for mechanical binding in steering gear
- Test sensor voltage range
Repair notes
Replace active steering motor/sensor assembly.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent