C0341high severityChassis
Active Roll Control Actuator Circuit Front
on 2014 Jeep Cherokee 2.4L I4 · 4WD
What this code means
Malfunction in the front active roll control actuator.
Symptoms
- Front body roll increased
- Warning light on
- Front stabilizer bar ineffective
- Handling loose in corners
Common causes
- Front actuator motor or valve failure
- Wiring damage
- Actuator seized
- Control module fault
Diagnostic steps
- Test actuator winding resistance or hydraulic valve
- Command actuator with scan tool
- Inspect for mechanical binding
- Check wiring and connector
Repair notes
Replace front active roll control actuator.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent