C0405low severityChassis

ACC Sensor Blocked

on 2014 Jeep Cherokee 2.4L I4 · 4WD

What this code means

The adaptive cruise control sensor reports its view is obstructed.

Symptoms

  • ACC temporarily unavailable message
  • Sensor blocked warning on dash
  • ACC disengages in bad weather

Common causes

  • Mud, snow, or ice covering sensor area
  • Aftermarket grille or bumper cover blocking sensor
  • Heavy rain or fog
  • Damaged sensor cover or radome

Diagnostic steps

  1. Clean radar sensor cover or camera lens
  2. Inspect bumper fascia sensor opening
  3. Check for aftermarket parts blocking sensor
  4. Verify no damage to sensor radome
  5. Test in clear weather to confirm resolution

Repair notes

Clean sensor area thoroughly. Remove any aftermarket obstructions. Replace damaged radome.

Other Chassis codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2014 Jeep Cherokee repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Jeep Cherokee — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →