C0435low severityChassis
Lane Keep Assist Camera Calibration Required
on 2014 Jeep Cherokee 2.4L I4 · 4WD
What this code means
The forward camera used for lane detection requires calibration.
Symptoms
- LKA unavailable
- LDW may be inaccurate
- Camera calibration message on dash
Common causes
- Windshield replaced
- Camera removed during service
- Camera mounting shifted
- Software update cleared calibration
Diagnostic steps
- Perform static camera calibration with manufacturer target
- Perform dynamic calibration drive if required
- Verify windshield meets camera system specifications
- Check camera mounting bracket
Repair notes
Perform camera calibration per manufacturer procedure. May require static target setup.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent