P0106moderate severityPowertrain
MAP/BARO Pressure Circuit Range/Performance
on 2014 Jeep Cherokee 2.4L I4 · 4WD
What this code means
The MAP sensor reading is not changing appropriately with engine load changes.
Symptoms
- Check Engine Light
- Poor fuel economy
- Hesitation
- Stalling
Common causes
- Vacuum leak
- Clogged MAP sensor port
- Faulty MAP sensor
- EGR system issue
Diagnostic steps
- Monitor MAP reading at idle vs 2500 RPM
- Check for vacuum leaks
- Inspect MAP sensor port
- Test EGR system
Repair notes
Clean MAP port, repair vacuum leaks, or replace sensor.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1