P0108moderate severityPowertrain
MAP/BARO Pressure Circuit High Input
on 2014 Jeep Cherokee 2.4L I4 · 4WD
What this code means
The MAP sensor signal voltage is above the maximum expected value.
Symptoms
- Check Engine Light
- Lean running
- Poor acceleration
- Surge
Common causes
- Open circuit in MAP signal wire
- Faulty MAP sensor
- Short to voltage
Diagnostic steps
- Test MAP voltage
- Check for open circuits
- Test sensor reference voltage
Repair notes
Repair wiring or replace MAP sensor.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1