P1594moderate severityPowertrain
Charging System Voltage Too High
on 2014 Jeep Cherokee 2.4L I4 · 4WD
What this code means
The PCM has detected that the charging system voltage is above the acceptable range. The voltage regulator in the alternator is allowing excessive voltage, which can damage electrical components and boil battery electrolyte.
Symptoms
- Check Engine Light
- Battery warning light may illuminate
- Electrical components failing prematurely
- Battery swelling or leaking
- Headlights excessively bright
Common causes
- Faulty voltage regulator in alternator
- Poor ground connection at alternator
- Corroded battery cables
- Faulty PCM voltage sense circuit
- Wiring issue in charging circuit
Diagnostic steps
- Measure charging voltage at battery with engine running (should be 13.5-14.8V)
- Check alternator ground connection
- Inspect battery cables and terminals for corrosion
- Test voltage regulator function
- Check PCM voltage sense wire
Repair notes
Replace the alternator if the voltage regulator is causing overcharging.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1