Back to 2014 Jeep Cherokee
Help
2014 JEEP CHEROKEE
2.4L I4•4WD•AUTOMATIC•gas
13 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor1094Torque7236Fluid16DTC1816Battery2Maintenance0Recalls13
P2015low severityPowertrain

Intake Manifold Runner Position Sensor/Switch Range/Performance Bank 1

on 2014 Jeep Cherokee 2.4L I4 · 4WD

What this code means

The intake manifold runner position sensor is reporting values outside the expected range.

Symptoms

  • Check engine light
  • Runner control operates erratically

Common causes

  • Worn sensor
  • Runner linkage worn
  • Intermittent connection
  • Carbon binding flaps

Diagnostic steps

  1. Monitor sensor values during operation
  2. Check for mechanical binding
  3. Inspect linkage

Repair notes

Replace sensor or repair linkage. Clean carbon from flaps.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2014 Jeep Cherokee repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Jeep Cherokee — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →