B0088high severityBody
SRS Control Module Voltage Low
on 2014 Jeep Cherokee 3.2L V6 · AWD
What this code means
The SRS control module is receiving lower than specified operating voltage.
Symptoms
- Airbag warning light on
- SRS codes set
- Multiple body control faults may occur
Common causes
- Low battery voltage
- Corroded battery terminals
- Faulty ACM power supply circuit
- High-resistance connection in power feed
Diagnostic steps
- Check battery voltage
- Inspect battery terminal connections
- Measure voltage at ACM connector
- Check ground circuit resistance
- Test charging system
Repair notes
Repair battery connections or ACM power circuit. Charge or replace battery if low.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit