C0055high severityChassis
ABS Front Inlet Valve Solenoid Circuit
on 2014 Jeep Cherokee 3.2L V6 · AWD
What this code means
Malfunction detected in the front ABS inlet valve solenoid circuit inside the hydraulic modulator.
Symptoms
- ABS warning light on
- ABS not functioning on front wheels
- Longer stopping distances
- Brake pedal pulsation absent during ABS event
Common causes
- Faulty inlet valve solenoid
- ABS module internal failure
- Wiring to module damaged
- Corroded module connector
Diagnostic steps
- Check ABS module connector for corrosion
- Test solenoid resistance through module connector pins
- Inspect wiring between ABS module and ECU
- Command solenoid activation with scan tool
- Check for internal module fault codes
Repair notes
If solenoid has failed internally, the ABS hydraulic modulator assembly must be replaced.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent