C0095moderate severityChassis
Brake Lamp Switch Circuit
on 2014 Jeep Cherokee 3.2L V6 · AWD
What this code means
Malfunction in the brake lamp switch circuit detected by the ABS or stability control module.
Symptoms
- ABS light on
- Cruise control inoperative
- Brake lights stuck on or not illuminating
- Shift interlock may not release
Common causes
- Brake light switch out of adjustment
- Faulty brake light switch
- Wiring damage
- Blown brake light fuse
Diagnostic steps
- Test brake light switch operation
- Check brake light fuse
- Inspect brake light switch adjustment at pedal
- Test circuit continuity
- Check for power and ground at switch
Repair notes
Adjust or replace brake light switch. This switch serves multiple systems.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent