C0411moderate severityChassis
ACC Radar Module Communication Fault
on 2014 Jeep Cherokee 3.2L V6 · AWD
What this code means
Loss of CAN bus communication with the ACC radar module.
Symptoms
- ACC disabled
- Multiple driver assist warnings
- Forward collision alert unavailable
Common causes
- CAN wiring fault to radar module
- Module connector disconnected
- Radar module power loss
- CAN bus termination issue at module
Diagnostic steps
- Check CAN communication to radar module
- Inspect module connector
- Verify power and ground at module
- Check CAN bus wiring continuity
- Look for U-codes related to radar module
Repair notes
Repair CAN bus wiring or connector. Replace module if communication chip has failed.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent