C0541high severityChassis
Torque Vectoring Control Module Fault
on 2014 Jeep Cherokee 3.2L V6 · AWD
What this code means
Internal fault in the torque vectoring module that distributes torque side-to-side.
Symptoms
- Torque vectoring warning
- Handling reduced in corners
- Sport mode limited
- AWD light on
Common causes
- Module internal failure
- Module overheating
- Software error
- Power supply issue to module
Diagnostic steps
- Check module power and ground
- Scan for internal module codes
- Check module temperature
- Attempt module reset
- Check for software updates
Repair notes
Replace torque vectoring module. Program and calibrate after installation.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent